SCSI-2 Cables - Half Pitch DB50 (HPDB50) Connectors, Male to Male
SCSI-2 cables with half pitch DB50 (HPDB50) male to male connectors provide reliable data interconnects in legacy and industrial storage environments supporting 50-pin D-subminiature interfaces straight wired for consistent signal continuity. Designed for data applications allowing direct device-to-device connectivity in storage and peripheral systems, these cables use flexible round stranded 28 AWG conductors arranged in 25 twisted pairs reducing crosstalk with double shielding using copper braid and aluminum mylar foil limiting EMI/RFI interference. Available in 0.5m, 1.0m, 2.0m, and 3.0m lengths with light gray PVC jacket.
For comprehensive SCSI cable solutions beyond SCSI-2 HPDB50 male to male configurations, explore our SCSI Cables category, featuring SCSI-1 Centronics, SCSI-2 HPDB50, SCSI-3 HPDB68, Ultra SCSI VHDCI, adapter cables, and LSZH assemblies for legacy storage, hard disk drive connectivity, and data transfer applications.
Related Categories:
- SCSI-1 Extension Cables - Centronics 50 Position Connectors (CN50), Male to Female
- SCSI-1 Cables - Centronics 50 Position Connectors (CN50), Male to Male
- SCSI-3 Cables - Half Pitch DB68 (HPDB68) Connectors, Male to Male
- Ultra SCSI (SCSI-5) Cables - 0.8mm Pitch VHDCI High Density Connectors, Offset Backshells
- Low Smoke Zero Halogen (LSZH) SCSI-3 Cables - Half Pitch DB68 (HPDB68) Connectors, Male to Male
FAQ
What are HPDB50 male to male SCSI-2 cables used for?
SCSI-2 cables with half pitch DB50 (HPDB50) male to male connectors are built for reliable data interconnects in legacy and industrial storage environments supporting applications including data transfer, hard disk drive connectivity, and storage systems. The in-series cable configuration allows direct device-to-device connectivity in storage and peripheral systems where legacy SCSI interfaces remain in operation. These cables support 50-pin D-subminiature interfaces straight wired for consistent signal continuity in structured data environments.
What conductor specifications do HPDB50 SCSI-2 cables use?
HPDB50 SCSI-2 cables are constructed using flexible round stranded wire with 28 AWG conductors arranged in 25 twisted pairs to help reduce crosstalk during operation in data transfer and hard disk drive connectivity applications. The 28 AWG gauge provides flexibility for routing in rack and equipment layouts while maintaining reliable signal transmission. The 25 twisted pair arrangement supports 50-pin D-subminiature interface requirements in legacy and industrial storage environments.
What shielding protects HPDB50 male to male SCSI-2 cables?
The HPDB50 SCSI cable assembly has double shielding with copper braid and aluminum mylar foil to help limit EMI/RFI interference in data transfer environments and storage system applications. Double shielding with copper braid and aluminum mylar foil supports reliable data interconnects in hard disk drive connectivity and peripheral systems requiring interference protection.
What cable lengths are available for SCSI-2 HPDB50 male to male cables?
Available cable lengths include 0.5 m, 1.0 m, 2.0 m, and 3.0 m (approximately 19.68 in to 118.11 in), providing options for different rack and equipment layouts in legacy and industrial storage environments. The multiple length options accommodate varying equipment separation distances in data transfer, hard disk drive connectivity, and storage system installations. Length variety from 0.5m to 3.0m supports both adjacent device connections and longer runs in structured data environments.
What connector type do SCSI-2 cables with HPDB50 use?
SCSI-2 cables with half pitch DB50 (HPDB50) male to male connectors support 50-pin D-subminiature interfaces straight wired for consistent signal continuity in storage and peripheral systems. Male to male configuration enables direct device-to-device connectivity in data applications requiring legacy SCSI interface connections.
What applications require HPDB50 male to male SCSI-2 cables?
HPDB50 male to male SCSI-2 cables are suitable for applications including data transfer, hard disk drive connectivity, and storage systems in legacy and industrial environments. The combination of double shielding, twisted pair construction, and molded connector design makes them suitable for structured data environments where legacy SCSI interfaces remain in operation. Applications include connecting SCSI-2 controllers to hard disk drives, storage arrays, and peripheral devices in industrial control systems and legacy data storage installations.
Need assistance selecting the right HPDB50 male to male SCSI-2 cable for your legacy storage or hard disk drive connectivity application? Our engineering team provides expert technical guidance on cable length selection, shielding requirements, twisted pair specifications, and connector compatibility for your specific SCSI-2 data transfer, storage system, or peripheral device application requirements.
Contact Sales: Sales@L-com.com
Product Technical Support: techsupportrf@infiniteelectronics.com
L-com SCSI-2 cables are part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment.
