400-Series and 600-Series Coax Cable Strip Tools
400-Series and 600-Series coax cable strip tools support efficient and repeatable preparation of coaxial cables in RF and telecom installations for cable assembly, field installation, and cable repair tasks requiring consistent strip dimensions. Designed to cut and trim coaxial jacket, shield, and inner insulation in single steps through clockwise rotation removing unwanted cable sections, these tools prepare cables for connector termination. HT-STRIP400-1 serves 400-Series cables while HT-STRIP600-1 handles 600-Series applications. Replacement blades available in sets of two supporting extended tool service life.
For comprehensive coaxial cable preparation tool solutions beyond 400-Series and 600-Series strip tools, explore our Coax Tools - Terminate Cable Assemblies category, featuring crimp tools, compression tools, rotary cable strippers, weatherproof tape, and cable preparation accessories designed for RF cable assembly and field installation applications.
Related Categories:
- Professional Grade Crimp and Compression Tools - Type F Plugs
- Coaxial Cable Stripper - 1/4" Strip for RG59 and RG6 Cable
- Professional Grade 8 Point Center Pin Crimp Tool
- Crimping Tools Single Die - For use with RG58, RG59 and RG62 Coaxial Connectors and Center Pins
- Weatherproof Tape
FAQs
What are 400-Series and 600-Series coax cable strip tools used for?
L-com 400-Series and 600-Series coax cable strip tools are designed to support efficient and repeatable preparation of coaxial cables used in RF and telecom installations. These coaxial cable strippers are intended for use with standard 400-Series and 600-Series coax cable types and are commonly applied in cable assembly, field installation, and cable repair tasks where consistent strip dimensions are required.
How do 400-Series and 600-Series coax strip tools work?
The coax cable strip tool is designed to cut and trim the coaxial jacket, shield, and inner insulation in a single step. Installers prepare the cable by inserting the unstripped end into the tool and rotating it clockwise four to five times to remove the unwanted cable section in a controlled manner. This single-step process maintains consistent strip lengths for crimp-style connectors in RF cable assembly and field installation applications.
What is the HT-STRIP400-1 coax cable strip tool designed for?
HT-STRIP400-1 coax cable strip tool is used for preparing 400-Series coaxial cable prior to connector termination and serves as an alternative to the Times Microwave ST-400EZ strip tool. The HT-STRIP400-1 supports efficient cable preparation by trimming jacket, shield, and insulation in one process in cable assembly, field installation, and cable repair environments. The tool maintains consistent strip dimensions for 400-Series coax cable applications requiring repeatable cable preparation.
What is the HT-STRIP600-1 coax cable strip tool intended for?
The HT-STRIP600-1 coax cable strip tool follows the same operating method and is intended for 600-Series coaxial cable applications. It supports uniform cable preparation by trimming the jacket, shield, and insulation in one process, helping maintain consistent strip lengths for crimp-style connectors. This model is an alternative to the Times Microwave ST-600EZ strip tool and is commonly used in RF cable installation and maintenance environments.
Are replacement blades available for coax cable strip tools?
Replacement blades are available in sets of two to support extended tool service life and continued performance in professional cable preparation tasks. The replacement blade sets enable long-term tool use across cable assembly, field installation, and cable repair applications. Blade replacement supports consistent stripping performance in RF and telecom installations requiring ongoing 400-Series and 600-Series coax cable preparation.
What cable types are compatible with coax cable strip tools?
Coax cable strip tools are intended for use with standard 400-Series and 600-Series coax cable types in RF and telecom installations. The HT-STRIP400-1 handles 400-Series cables while the HT-STRIP600-1 accommodates 600-Series applications. Both tools support cable assembly, field installation, and cable repair tasks requiring consistent strip dimensions for connector termination on these standard coax cable series.
Need assistance selecting the right coax cable strip tool for your 400-Series or 600-Series RF cable preparation needs? Our engineering team provides expert technical guidance on cable series compatibility, replacement blade requirements, stripping techniques, and tool specifications for your specific cable assembly, field installation, or RF maintenance application requirements.
Contact Sales: Sales@L-com.com
Product Technical Support: techsupportrf@infiniteelectronics.com
L-com offers a wide selection of in-stock 400-Series and 600-Series coax cable strip tools and replacement blade sets for both domestic and international shipping. Whether you’re assembling RF cable assemblies or performing field installations and repairs, L-com provides dependable stripping tools designed to support consistent results.
